Services

Local Fresno County and surrounding areas Dj's we are your local spot where you can get your turntables serviced.  We can get them tuned, repairs, replacement parts, customization, change out your tone arms, or internally grounded all done by the one and only Dj Henray Customs.  It will save you the drive to Salida, CA., the costly shipping or possible damage by a shipping carrier.

*Call or email us for pricing on services not listed.
*Prices listed are for each turntable.
*Prices subject to change without notice.

1. RCA'S REPLACED WITH INTERNAL GROUND PART/LABOR - $60

THIS INCLUDES A NEW SET OF PREMIUM 24 KT GOLD CONNECTOR RCA'S & INTERNAL GROUNDING

2. CUSTOM GRAPHICS WRAP MATERIAL & DESIGN (PART& LABOR) - $210

THIS CONSISTS OF GRAPHIC DESIGN, FULL DIS ASSEMBLY, WRAPPING & REASSEMBLY OF UNIT. HEAVY DUTY 3M CAR WRAP MATERIAL IS USED. THIS HAS A CLEAR LAMINATE PROTECTION FOR DURABILITY. TUNE UP & CALIBRATION INCLUDED.
NOTE: MUST PURCHASE NEW PITCH CONTROL DECAL WHEN GETTING TURNTABLE WRAPPED

3. PITCH CONTROL METAL DECAL BLACK, SILVER, OR CUSTOM COLOR - $20

THIS METAL DECAL MUST BE PURCHASED WHEN WRAPPING OR PAINTING

4. CUSTOM PAINT ON TONE-ARM BASE (PART/LABOR) - $60

THIS INCLUDES DE SOLDERING OF TON-ARM AND COMPLETE DIS ASSEMBLY OF THE TONE-ARM BASE FOR PAINTING. INCLUDES CALIBRATION & TUNING. 

5. CUSTOM PAINT ON ENTIRE TONE ARM ASSEMBLY (PART/LABOR) - $120
THIS INCLUDES DE SOLDERING OF TON-ARM ASSEMBLY AND COMPLETE DIS ASSEMBLY OF THE TONE-ARM ASSEMBLY FOR PAINTING. INCLUDES CALIBRATION & TUNING.

6. DHC STR8 TONE ARM MODIFICATION (PART/LABOR) - $80

THIS INCLUDES A NEW DHC OFFICIAL STR8 ARM ANY COLOR, INSTALLED & CALIBRATED

7. CUSTOM POWDER COATING (LABOR/PAINT) - $220 / CANDY COLORS OR 2 STEP - $250

THIS CONSISTS OF FULLY DISASSEMBLING THE UNIT, PREPPING FOR PAINT, PROFESSIONALLY POWDER COATED. REASSEMBLING OF THE UNIT, TUNE UP & CALIBRATION INCLUDED.

8. LED POP UP LIGHT MOD (PART/LABOR)  - $35

THIS INCLUDES FULL CONVERSION OF POP UP LIGHT, FROM STANDARD LIGHT BULB TO LED BULB, YOUR CHOICE OF COLOR

9. LED PITCH CONTROL LIGHT MOD (PART/LABOR) - $20

THIS CONSISTS OF 1 NEW ULTRA BRIGHT LED BULB INSTALLED FOR ZERO MARK ON TECHNICS PITCH CONTROL, YOUR CHOICE OF COLOR

10. LED LIGHT FOR 33/45 RPM (PART/LABOR) - $20

THIS CONSISTS OF 2 NEW ULTRA BRIGHT LED BULBS INSTALLED FOR THE 33/45 BUTTONS, YOUR CHOICE OF COLOR

11. LED ON/OFF KNOB LIGHT MOD (PART/LABOR) - $20

THIS CONSISTS OF 4 NEW ULTRA BRIGHT LED BULBS INSTALLED FOR THE ON/OFF KNOB OF THE TURNTABLE, YOUR CHOICE OF COLOR

12. LED PACKAGE DEAL INCL. ON/OFF, 33/45, POP UP, & PITCH (PART/LABOR) - $70

THIS INCLUDES YOUR CHOICE OF COLOR FOR ALL BASIC ULTRA BRIGHT LED CONVERSIONS, YOUR CHOICE OF COLOR

13. ON/OFF SWITCH KNOB REPLACEMENT (PART/LABOR) -$35

INCLUDES PART AND LABOR

14. POP UP LIGHT REPLACEMENT STANDARD BULB NOT LED (PART/LABOR) - $20

THIS CONSISTS OF REPLACING THE BULB ON THE POP UP LIGHT WITH A STANDARD LIGHT BULB, NOT LED

15. TONE ARM REST (PART/LABOR) - $19

THIS INCLUDES PART AND LABOR

16. TUNE UP BASIC (LABOR) - $40 / TUNE UP EXTREME (LIQUID SPILLAGE) - $65

INCLUDES CALIBRATING START/STOP, PITCH CONTROL, ADJUSTING & CLEANING TONE-ARM, LUBING BALL BEARING SPINDLE (PLATTER), TESTING RCA'S & GROUND WIRE, DUSTING AND CLEANING ALL CIRCUIT BOARDS & CABINET

17. MAIN PC BOARD REPLACEMENT (PART/LABOR) - $220

THIS CONSISTS OF REPLACING THE MAIN CIRCUIT BOARD, COMPLETE DIS ASSEMBLY AND RE-ASSEMBLY OF UNIT

18. PITCH CONTROL REPLACEMENT MK2/M3D/MK5 - $90 (PART/LABOR) / FOR M5G - $120 (PART/LABOR)

THIS CONSISTS OF DE SOLDERING OLD PITCH FADER AN RE-SOLDERING NEW PITCH FADER, CALIBRATING, DIS ASSEMBLY AND REASSEMBLY OF UNIT

19. INTERNAL GROUNDING (LABOR) - $20

THIS CONSISTS OF OPENING UNIT UP & GROUNDING FROM THE INSIDE. ELIMINATING THE EXTERNAL GROUND WIRE. WORKS GREAT WITH SERATO, TRAKTOR, & REGULAR VINYL

20. ELIMINATING CLICK ON PITCH CONTROL (LABOR) - $20

THIS CONSISTS OF COMPLETE DIS ASSEMBLY OF PITCH CONTROL FADER & REMOVING BALL BEARING FOR A SMOOTH PITCH CONTROL, NO CLICK AT THE ZERO MARK

21. POWER CORD REPLACEMENT (PART/LABOR) - $20

THIS INCLUDES ONE BRAND NEW POWER CORD REPLACED, WHITE OR BLACK

22. VOLTAGE CONVERSION 110/220 OR 220/110 (PART/LABOR) - $70

THIS INCLUDES VOLTAGE SWITCH & ADAPTER

23. PLATTER LIGHTS LED'S (HALOS) (PART/LABOR) - $100

INCLUDES ULTRA BRIGHT COLOR LED'S CUSTOMIZED UNDER PLATTER (COLOR CHOICE) RED, WHITE, BLUE, YELLOW, ORANGE, GREEN, PURPLE

24. PITCH CONTROL LED'S UNDER PITCH LIGHTS (PART/LABOR) - $30

INCLUDES YOUR CHOICE COLOR LED'S UNDER PITCH CONTROL

25. PITCH CALIBRATION (LABOR) - $20

INCLUDES LABOR FOR CALIBRATING AND TUNING PITCH CONTROL

26. FEMALE RCA PORTS MODIFICATION (PART/LABOR) - $80

THIS CONSISTS OF INSTALLING 2 FEMALE RCA JACKS ON CABINET TO ALLOW FOR RCA CABLE DISCONNECTION

27. PLATTER REFURBISH PAINT (LABOR) - $65

INCLUDES REFURBISHING AND PAINT, YOUR CHOICE OF COLOR

28. PLATTER REFURBISH PAINT INCLUDING INDIVIDUAL PLATTER DOTS PAINTED (LABOR) - $115

INCLUDES REFURBISHING AND PAINT OF PLATTER & EACH PLATTER DOT, YOUR CHOICE OF COLOR

29. TONE-ARM REPLACEMENT MK2,M3D,MK5 (PART/LABOR) - $210 / FOR M5G (PART/LABOR) - $250

THIS CONSISTS OF REPLACING TONE ARM, UNIT DIS ASSEMBLY AND RE-ASSEMBLY IS REQUIRED, BE SURE TO CHECK THE DIFFERENT PRICES FOR THE DIFFERENT MODELS

30. POWER TRANSFORMER REPLACED MK2, M3D, MK5 (PART/LABOR) - $110 / FOR M5G - $150

THIS CONSISTS OF REPLACING BAD/DAMAGED TRANSFORMER & INSTALLING A NEW ONE

31. PITCH CONTROL CIRCUIT BOARD REPLACED MK2, M3D, MK5 (PART/LABOR) - $60 / FOR M5G - $85

REMOVING OLD PITCH CONTROL CIRCUIT BOARD AND REPLACING IT WITH A NEW ONE. COMPLETE DIS ASSEMBLY AN RE-ASSEMBLY OF UNIT

32. TONE ARM BEARINGS REPLACED (PART/LABOR) - $85

THIS CONSISTS OF REPLACEMENT OF TONE ARM PIVOT BRACKET BEARINGS

33. RCA CIRCUIT BOARD REPLACEMENT (PART/LABOR) - $45

THIS CONSISTS OF UNIT DIS ASSEMBLY REPLACING RCA BOARD & REASSEMBLY OF UNIT

34. DHC BILLET ALUMINUM CUSTOM POWDER COAT / LASER ETCHED COLOR START/STOP, ON/OFF, 33/45, POP UP, & PITCH KNOB (PART/LABOR) - $130

THIS CONSISTS OF POWDER COAT & LASER ETCHED ON KNOBS & BUTTONS LISTED, YOUR CHOICE OF COLOR, CUSTOM BILLET ALUMINUM

35. DICER INLAYS (DICERS INCLUDED) - $400

THIS CONSISTS OF NOVATION DICERS CUSTOM BUILT INTO YOUR TECHNICS TURNTABLES

36. CUSTOM LASER ETCHED TECHNICS LOGOS & TEXT - $75

THIS CONSISTS OF LASER ETCHED LOGOS & TEXT BACK ON YOUR TECHNICS CABINET FOR A PROFESSIONAL & DURABLE FINISH

37. CUSTOM LED DHC STR8 TONE ARM CONVERSION - (PART/LABOR) $110

THIS CONSISTS OF MODIFYING ORIGINAL S ARM TO LED STR8 TONE ARM

38. UNDER CABINET LED'S - (PART/LABOR) $100

THIS CONSISTS OF UNDER CABINET LEDS INSTALLED

39. TONE ARM BASE HEIGHT ADJ UNFREEZE - (PART/LABOR) $50

THIS CONSISTS OF TONE ARM DISASSEMBLY & UNFREEZING STUCK HEIGHT ADJUSTMENT

40. MIXER FACE PLATE POWDER COATING & LASER ETCHED - (PART/LABOR) $190

THIS CONSISTS OF POWDER COATING MIXER FACE PLATE & LASER ETCHING TEXT BACK ON (NOTE: MIXER PLATE MUST BE OF METAL MATERIAL, NOT PLASTIC)

41. CUSTOM PACKAGE DEAL - POWDER COAT OR GRAPHIC WRAP / LED'S / TUNE UP / LASER ETCHED LOGOS / RCA'S W INTERNAL GROUND - $400 (SAVE $90)

PRICE IS FOR 1 TURNTABLE. IF THERE ARE ANY REPAIRS NEEDED, THIS WOULD BE ADDITIONAL & ADDED TO THE FINAL COST. YOU WOULD BE NOTIFIED PRIOR TO BEGINNING OF WORK WITH A NEW ESTIMATE. YOUR CHOICE OF COLOR POWDER COATING, LED'S, RCA'S

0 products

Sorry, there are no products in this collection